This is the first jailbroken iPhone 5

Unless Mossberg or Pogue knocked it last week, @Chpwn (Grant Paul) has the first jailbroken iPhone 5 which he posted to his Twitter account a few minutes ago. It is usually common courtesy to give Apple devices 24 hours before Jailbreaking but someone apparently couldn’t help themselves. More below:

Tweets below

Grant Paul (chpwn)@chpwn
Here’s the Cydia homepage on the iPhone 5:



Grant Paul (chpwn)@chpwn
Taller screens like Cydia too. :)




You can follow Limerain on Twitter, Facebook, or RSS to be notified of any updates.

*thanks 9to5mac*

 Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

iPhone Dev-Team Releases RedSn0w and PwnageTool Updates to Jailbreak iOS 5.1.1

The iPhone Dev-Team has released updates to PwnageTool, RedSn0w, and CInject that bring support for the iOS 5.1.1 untethered jailbreak.

RedSn0w
redsn0w allows owners of A4+earlier devices to install rocky-racoon two different ways:
● backup/restore method similar to Absinthe and cinject
● its traditional limera1n-based ramdisk install. If you have a lot of media on your A4 device (music, movies, TV shows, etc), then the ramdisk method is preferrred because it avoids any possibility of later problems related to syncing to iCloud (including Photo Stream and Music Match). The ramdisk method is not available for A5 devices or later because limera1n can't be used. If you'd like to use redsn0w's ramdisk method, just be sure to put the A4 device in DFU or Recovery mode before starting redsn0w (otherwise it will immediately start to use the backup/restore method).

We've also added a new redsn0w feature specifically for those who got in on the SAM unlock: you can now include your SAM tickets as part of your initial ramdisk jailbreak of iPhone4 or earlier, or alternatively you can upload your SAM tickets to any device after its been jailbroken. redsn0w accepts either the individual SAM activation ticket plist file, or the entire zip file created by redsn0w's "Backup" button. As usual, redsn0w continues to cover all of its previous jailbreaks and untethers (so redsn0w-0.9.12b1 covers everything from 5.1.1 all the way back to 4.1).

PwnageTool
PwnageTool also avoids any possible sync issues, but again it applies only to A4+earlier devices. If you unlock your iPhone with ultrasn0w or a commercial method, you must use PwnageTool to avoid updating your baseband otherwise you'll lose the unlock. PwnageTool will also jailbreak+untether the AppleTV2,1 5.0_2B206f (unless you customize the IPSW further, you'll have just basic SSH access to the device).

Contributions:
If you'd like to contribute to those that actually developed rocky-racoon, please visit here (any other links you may see are not going to the actual rocky-racoon developers, they're being diverted to other "related" or fraudulent accounts).

This particular jailbreak brought an unusual amount of fanfare and hoopla to the table, including "press releases" and other haughty silliness. We'd just like to take this opportunity to remind everyone that jailbreaking is about freedom, not fame and donations!

Downloads:
You can find download links here:
● PwnageTool
● Redsn0w
● CInject

Tutorials:
● iPhone 4S (Windows, Mac)
● More coming soon...

You can follow Limerain on @limerain_com, Facebook page , or RSS to be notified of any updates.







*thanks iclarified*

Send us a story or tip @ TipsForLimerain.com@gmail.com and follow our pages for the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com
And like our Facebook page www.iPodSets.com
- Posted using my iPhone 4

How to Jailbreak Your iPad 1 Using RedSn0w on Mac 4.3.3

These are instructions on how to jailbreak your iPad on the 4.3.3 firmware using RedSn0w for Mac. 

If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.

Step One
Create a folder on your desktop called Pwnage

RedSn0w rc16 can be ran on top of rc15. Make sure to uncheck Cydia installation when performing the installation.

You can download the new versions of RedSn0w and PwnageTool here:
● redsn0w 0.9.6rc15 (Windows, Mac)
● PwnageTool 4.3.3 (Mac)


 and place it in the Pwnage folder. Likewise, download the latest 4.3.3 firmware from below and place it in the same folder. 

4.3.3 (iPad 1): iPad1,1_4.3.3_8J3_Restore.ipsw

Extract the RedSn0w zip file by double clicking it.


Step Two
Connect your iPad to the computer and launch iTunes. 


Select your iPad from the list of devices on the left. Now hold down Option and click the Restorebutton. Restore is preferred as it won't create any wasted space on your iPad.

Navigate to the Pwnage folder on your desktop and select the 4.3.3 firmware ipsw. Click theChoose button to continue. 


Step Three
Once iTunes has finished updating your iPad to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.


Step Four
Once RedSn0w opens click the Browse button


Step Five
Select the 4.3.3 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.


Step Six
Once the firmware has been verified click the Next button to continue.


Step Seven
RedSn0w will now prepare the jailbreak data


Step Eight
From this window you can select the jailbreak options you would like. Make sure Cydia is selected and click the Next button to continue


Step Nine
Please plug your iPad into the computer and make sure its OFF then click the Next button


Step Ten
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here


Hold down both the Home button and the Power button for 10 seconds.


Release the Power button and continue holding the Home button until RedSn0w detects the device.


Step Eleven
Your iPad will now reboot


Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.


Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPad finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.


*As usual a big thanks to the iPhone Dev-Team and I0n1c for their hard work and contribution to the iPhone community.

*thanks iclarified*

Our new Forum is now open here or on the top tabs marks Forums, please register and post.. For the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com www.iPodSets.com - Posted using my iPhone 4

How to Jailbreak Your iPod Touch 3G Using RedSn0w on Mac 4.3.3

These are instructions on how to jailbreak your iPod touch 3G on the 4.3.3 firmware using RedSn0w for Mac.

If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.

Step One
Create a folder on your desktop called Pwnage

RedSn0w rc16 can be ran on top of rc15. Make sure to uncheck Cydia installation when performing the installation.

You can download the new versions of RedSn0w and PwnageTool here:
● redsn0w 0.9.6rc15 (Windows, Mac)
● PwnageTool 4.3.3 (Mac)


 and place it in the Pwnage folder. Likewise, download the latest 4.3.3 firmware from below and place it in the same folder.

4.3.3 (3G): iPod3,1_4.3.3_8J2_Restore.ipsw

Extract the RedSn0w zip file by double clicking it.


Step Two
Connect your iPod to the computer and launch iTunes.


Select your iPod from the list of devices on the left. Now hold down Option and click the Restorebutton. Restore is preferred as it won't create any wasted space on your iPod.


Navigate to the Pwnage folder on your desktop and select the 4.3.3 firmware ipsw. Click theChoose button to continue.


Step Three
Once iTunes has finished updating your iPod to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.


Step Four
Once RedSn0w opens click the Browse button


Step Five
Select the 4.3.3 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.


Step Six
Once the firmware has been verified click the Next button to continue.


Step Seven
RedSn0w will now prepare the jailbreak data


Step Eight
From this window you can select the jailbreak options you would like.


Make sure Cydia is selected and click the Next button to continue.

Step Nine
Please plug your iPod into the computer and make sure its OFF then click the Next button


Step Ten
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here


Hold down both the Home button and the Power button for 10 seconds.


Release the Power button and continue holding the Home button until RedSn0w detects the device.


Step Eleven
Your iPod will now reboot


Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.


Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPod finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.


*As usual a big thanks to the iPhone Dev-Team and I0n1c for their hard work and contribution to the iPhone community.

*thanks iclarified*

Our new Forum is now open here or on the top tabs marks Forums, please register and post.. For the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com www.iPodSets.com - Posted using my iPhone 4

How to Jailbreak Your iPod Touch 4G Using RedSn0w on Mac 4.3.3

These are instructions on how to jailbreak your iPod touch 4G on the 4.3.3 firmware using RedSn0w for Mac.

If you want to jailbreak a lower firmware version you can find the appropriate tutorial here.

Step One
Create a folder on your desktop called Pwnage

RedSn0w rc16 can be ran on top of rc15. Make sure to uncheck Cydia installation when performing the installation.

You can download the new versions of RedSn0w and PwnageTool here:
● redsn0w 0.9.6rc15 (Windows, Mac)
● PwnageTool 4.3.3 (Mac)


 and place it in the Pwnage folder. Likewise, download the latest 4.3.3 firmware from below and place it in the same folder. 

4.3.3 (4G): iPod4,1_4.3.3_8J2_Restore.ipsw

Extract the RedSn0w zip file by double clicking it.


Step Two
Connect your iPod to the computer and launch iTunes. 


Select your iPod from the list of devices on the left. Now hold down Option and click the Restorebutton. Restore is preferred as it won't create any wasted space on your iPod.

Navigate to the Pwnage folder on your desktop and select the 4.3.3 firmware ipsw. Click theChoose button to continue. 


Step Three
Once iTunes has finished updating your iPod to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.


Step Four
Once RedSn0w opens click the Browse button


Step Five
Select the 4.3.3 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.


Step Six
Once the firmware has been verified click the Next button to continue.


Step Seven
RedSn0w will now prepare the jailbreak data


Step Eight
From this window you can select the jailbreak options you would like.

Make sure Cydia is selected and click the Next button to continue.


Step Nine
Please plug your iPod into the computer and make sure its OFF then click the Next button


Step Ten
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here


Hold down both the Home button and the Power button for 10 seconds.


Release the Power button and continue holding the Home button until RedSn0w detects the device.


Step Eleven
Your iPod will now reboot


Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.


Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPod finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.


*As usual a big thanks to the iPhone Dev-Team and I0n1c for their hard work and contribution to the iPhone community.


*thanks iclarified*

Our new Forum is now open here or on the top tabs marks Forums, please register and post.. For the latest limera1n, rubyra1n, and all tech stories, follow us on Twitter at @iphonepixelpost or @limerain_com www.iPodSets.com - Posted using my iPhone 4